Dimensions Blind Flanges & Stud Bolts ASME B16.5

Notes..

Dimensions are in millimeters unless otherwise indicated.
The length of the Stud Bolt does not include the height of the chamfers (points).
The length of the Stud Bolts includes one Spiral Wound Gasket with a 4.5mm thick sealing element, which is compressed to 3mm while tightening the Raised Face flange connection.
Important! please read this short article

Dimensional Tolerances of Blind Flanges ASME B16.5

Outside Diameter *
Tolerances not listed in ASME B16.5 2013
≤ 24 = 1.6 mm
> 24 = ± 3.2 mm

Inside Diameter
not applicable

Outside Diameter of Hub
≤ 12 = + 2.4 mm / - 1.6 mm
≥ 14 = ± 3.2 mm

Drilling
Bolt Circle = 1.6 mm
Bolt Hole Spacing = ± 0.8 mm

Eccentricity of Bolt Circle
≤ 2.1/2 = 0.8 mm max.
≥ 3 = 1.6 mm max.

Thickness
≤ 18 = + 3.2 mm / - 0
≥ 20 = + 4.8 mm / - 0

Length thru Hub
≤ 18 = + 3.2 mm / - 0.8 mm
≥ 20 = + 4.8 mm / - 1.6 mm

Diameter of Contact Face
1.6 mm Raised Face = ± 0.8 mm
6.35 mm Raised Face
Tongue and Groove / Male-Female ± 0.4 mm

Studs are measured parallel to the axis (L) from the first to the thread without the chamfers (points). S = free threads equals 1/3 time bolt dia

Hex bolts are measured from under the head to the top of de bolt