× NPS 1/2 NPS 3/4 NPS 1 NPS 1.1/4 NPS 1.1/2 NPS 2 NPS 2.1/2 NPS 3 NPS 3.1/2 NPS 4 NPS 6 NPS 8 NPS 10 NPS 12  ▸ NPS 14 NPS 16 NPS 18 NPS 20 NPS 24

Dimensions Slip On Flanges & Stud Bolts ASME B16.5

Slip On flange
OTHER DIA NPS 14 ID 359.1
CLass 150 300 600 900 1500 2500
DIA A 400 425 432 451 ... ...
DIA D 535 585 605 640 ... ...
THK B 35 54 76.3 92.2 ... ...
DIA G 412.8 412.8 412.8 412.8 ... ...
DIA K 476.3 514.4 527 558.8 ... ...
H 57.6 76.6 100.4 136.4 ... ...
NO. L 12 20 20 20 ... ...
DIA L 31.8 31.8 38.1 41.3 ... ...
Stud Bolts Diameter x Length
DIA (in) 1 1.1/8 1.3/8 1.1/2 ... ...
 lgth (mm 135 180 235 275 ... ...

Notes..

  • Dimensions are in millimeters unless otherwise indicated.
  • The length of the Stud Bolt does not include the height of the chamfers (points).
  • The length of the Stud Bolts includes one Spiral Wound Gasket with a 4.5mm thick sealing element, which is compressed to 3mm while tightening the Raised Face flange connection.
  • ID = Depending on the wall thickness of the pipe, must be specified by the purchaser.
  • Important! please read this short article

Dimensional Tolerances of Slip On Flanges ASME B16.5
Outside Diameter *
Tolerances not listed in ASME B16.5 2013
≤ 24 = 1.6 mm
> 24 = ± 3.2 mm
Inside Diameter
≤ 10 = ± 0.8 mm
≥ 12 = + 1.6 mm / - 0 mm
Outside Diameter of Hub
≤ 12 = + 2.4 mm / - 1.6 mm
≥ 14 = ± 3.2 mm
Diameter of Counterbore
Same as for Inside Diameter
Drilling
Bolt Circle = 1.6 mm
Bolt Hole Spacing = ± 0.8 mm
Eccentricity of Bolt Circle
≤ 2.1/2 = 0.8 mm max.
≥ 3 = 1.6 mm max.
Thickness
≤ 18 = + 3.2 mm / - 0
≥ 20 = + 4.8 mm / - 0
Length thru Hub
≤ 18 = + 3.2 mm / - 0.8 mm
≥ 20 = + 4.8 mm / - 1.6 mm
Diameter of Contact Face
1.6 mm Raised Face = ± 0.8 mm
6.35 mm Raised Face
Tongue and Groove / Male-Female
± 0.4 mm

 


Studs are measured parallel to the axis (L) from the first to the thread without the chamfers (points). S = free threads equals 1/3 time bolt dia

Measuring lengths of Stud Bolts

 

Hex bolts are measured from under the head to the top of de bolt


Measuring lengths of Hex bolts

Related Post(s)

Socket weld flange
Dimensions Socket Weld Flanges
Dimensions NPS 1/2 to NPS 2.1/2, Pressure Class 150 - 1500 (other dimensions are available if required)...




Explore the World of Piping


© Werner Sölken 2008 -  
All rights reserved.
www.wermac.org uses Google Analytics

Privacy Policy

I must be old. I still believe in respect.