Dimensions of Spiral Wound Gaskets ASME B16.20
used with Raised Face flanges ASME B16.47 series B
OTHER PRESSURE CLASSES
600
| NPS | Inner Ring | Sealing Element | Outer Ring | |
| d1 | d2 | d3 | d4 | |
| 26 | 644.7 | 663.7 | 714.5 | 765.3 |
| 28 | 685.8 | 704.9 | 755.7 | 819.2 |
| 30 | 752.6 | 778 | 828.8 | 879.6 |
| 32 | 793.8 | 831.9 | 882.7 | 933.5 |
| 34 | 850.9 | 889 | 939.8 | 997 |
| 36 | 901.7 | 939.8 | 990.6 | 1047.8 |
| 38 | 952.5 | 990.6 | 1041.4 | 1104.9 |
| 40 | 1009.7 | 1047.8 | 1098.6 | 1155.7 |
| 42 | 1066.8 | 1104.9 | 1155.7 | 1219.2 |
| 44 | 1111.3 | 1162.1 | 1212.9 | 1270 |
| 46 | 1162.1 | 1212.9 | 1263.7 | 1327.2 |
| 48 | 1219.2 | 1270 | 1320.8 | 1390.7 |
| 50 | 1270 | 1320.8 | 1371.6 | 1447.8 |
| 52 | 1320.8 | 1371.6 | 1422.4 | 1498.6 |
| 54 | 1378 | 1428.8 | 1479.6 | 1555.8 |
| 56 | 1428.8 | 1479.6 | 1530.4 | 1612.9 |
| 58 | 1473.2 | 1536.7 | 1587.5 | 1663.7 |
| 60 | 1530.4 | 1593.9 | 1644.7 | 1733.6 |
General notes..
- Dimensions are in millimeters unless otherwise indicated.
- Image shows a Spiral Wound gasket with Inner - and Outer ring.
- d1 = Inside diameter when Inner ring is used.
- d2 = Inside diameter sealing element when no Inner ring is used.
- d3 = Outside diameter of sealing element.
- d4 = Outside diameter of Outer ring.
- The gasket thickness tolerance is ± 0.13 mm measured across the metallic portion of the gasket, not including the filler, which may protrude slightly beyond the metal.
- The gasket inside diameter tolerance for NPS 26 through NPS 34 is ± 0.8 mm, and the tolerance for NPS 36 through NPS 60 is ± 1.3 mm.
- The gasket outside diameter tolerance for NPS 26 through NPS 60 is ± 1.5 mm.
- The centering ring outside diameter tolerance is ± 0.8 mm.
- The inside diameter tolerance is ± 3.0 mm.
- Thickness of inner and outer ring.. 2.97 mm - 3.33 mm.
- ASME B16.47 Series A flanges NPS 12 through NPS 24 have the same raised face dimensions as ASME B16.5 flanges.
- There are no Class 900 flanges NPS 50 and larger.
Marking of Spiral Wound Gaskets
